รายละเอียดเพิ่มเติม
Element : Externally-polarized (DC bias) condenser
Polar Pattern : Cardioid and Figure-of-eight
Frequency Response : 20-18,000 Hz
Low Frequency Roll Off : 80 Hz, 12 dB/octave
Open Circuit Sensitivity : Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa
Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa
Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa
Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
Maximum Input Sound Level : Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Noise : Stereo 90°: 25 dB SPL
Stereo 127°: 16 dB SPL
Mid: 15 dB SPL
Side: 17 dB SPL
Dynamic Range : Mid: 134 dB, 1 kHz at Max SPL
Side: 132 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio : Stereo 90°: 69 dB, 1 kHz at 1 Pa
Stereo 127°: 78 dB, 1 kHz at 1 Pa
Mid: 79 dB, 1 kHz at 1 Pa
Side: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements : 48V DC, 6.4 mA typical (both channels total)
Switches : 90°, 127°, M-S; Flat, roll-off; 10 dB pad (nominal)
Weight : 517 g (18.2 oz)
Cable : 5.0 m (16.5′) long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
Dimensions : 193.0 mm (7.60″) long, 53.4 mm (2.10″) maximum body diameter
Output Connector : Integral 5-pin XLRM-type
Accessories Included : AT8449a shock mount for 5/8″-27 threaded stands; microphone dust cover; protective carrying case
Audio-Technica Case Style : R1
Features
- Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
- Independent cardioid and figure-of-eight condenser elements
- Switch selection of Mid-Side mode and two internally matrixed stereo modes
- Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Integral 80 Hz high-pass filter switch and 10 dB pad switch
- State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Certified by the METAlliance (Music Engineering and Technology Alliance)
